Miele KM 7999 FR Operating And Installation Instructions page 63

Problem
F6713 or F6771 appears
in the touch display and
the cooktop switches
itself off automatically.
F6716 appears in the
touch display and the
cooktop switches itself
off automatically.
F6734 appears in the
touch display and the
cooktop switches itself
off automatically.
A message not listed in
this table is appearing
in the cooking zone
displays.
Possible cause and remedy
An empty pan was heated up.
 Touch
.
OK
 Wait until the residual heat indicator  goes out
(see "Operation - Residual heat indicator").
 Cook only with filled pans.
The touch display is covered, e.g. by finger contact,
food boiling over, or an object.
 Clean off any dirt and/or remove the object (see
"Safety features - Safety switch-off").
 Touch
OK .
A pan is incorrectly positioned.
 Position the pan correctly (see "Operation -
Positioning cookware").
 Touch
.
OK
There is an electronic unit fault.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.
Problem solving guide
63