Temperature Adjustment During Auto Mode; Fan Speed - Mitsubishi SRK20ZSA-W User Manual

Temperature adjustment during AUTO mode

■ Default preset temperature during AUTO mode is 24°C for both cooling and heating mode. However, it can be adjusted (Minimum 18°C,
Maximum 30°C) using button or

FAN SPEED

■ The FAN SPEED can be set without DRY mode.
button.
1
Press the" or
When it is a little cold
Press the button.
■ Each time the
18 → 19 → ............ 23 → 24 → 25 ......... → 30.
When 30 is indicated, even if the
When it is a little hot
Press the button.
■ Each time the
30 → 29 → ............ 25 → 24 → 23 ......... → 18.
When 18 is indicated, even if the
1
Operation capacity by your choice
Set automatically by microcomputer
Silent operation
Energy-saving operation
Standard operation
Powerful operation with high capacity
• When FAN SPEED is changed from Hi to Lo or ULo, the sound of
refrigerant may be heard.
– 14 –
(TEMP)" button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Press the FAN SPEED button.
Each time the button is pressed, the fan speed changes.
AUTO ULo
NOTE
Lo Me Hi
FAN SPEED
AUTO
ULo
Lo
Me
Hi