Auto Mode Operation Procedure; Temperature Adjustment During Auto - Mitsubishi SRK50HE-S1 User Manual

AUTO mode operation procedure

I Automatically selects the operation mode (HE type: HEAT, DRY, COOL, CE type: COOL, DRY) depending on the room temperature when switched on.
Air flow direction adjustment
procedure. Page 10

Temperature adjustment during AUTO

Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
WARM
Press the
When a change in temperature is desired.
1
Press the or
I Each time the button is pushed, the switch over occurs in the following order –6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicatored, even if the
I Each time the button is pushed, the switch over occurs in the following order +6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicatored, even if the
1
2
NOTE
• Air is not blowing out during the op-
eration.
Page 17
button.
button.
button is pushed, the indicator does not change.
button is pushed, the indicator does not change.
Aim the remote control at the air-conditioner.
Press the ON/OFF button.
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
To stop:
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you don't want the AUTO mode programme, change to
HEAT, DRY or COOL instead of AUTO.
– 8 –
Press the ON/OFF button.
Page 9
button or the
COOL
Press the button.
button.