Auto Mode Operation Procedure; Temperature Adjustment During Auto; About Fan Speed - Mitsubishi SRK52CF-BN User Manual

AUTO mode operation procedure

I Automatically selects the operation mode (COOL, DRY) depending on the room temperature when switched on.
Air flow direction adjustment
procedure. Page 10

Temperature adjustment during AUTO

I Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the

About FAN SPEED

I You can choose the capacity of your air-conditioner when cooling or fan.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [
Aim the remote control at the air-conditioner.
2
Press the ON/OFF button.
NOTE
• Air is not blown out during the op-
eration.
Page 20
When a change in temperature is desired.
1
Press the
When it is a little cold
Press the button.
I Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the button.
I Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
FAN SPEED
Press the FAN SPEED button.
AUTO
HI
Move the [
MED
LO
– 8 –
mark] to the (Auto) position.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you don't want the AUTO mode program, change to
COOL, DRY or FAN instead of AUTO.
or button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
mark] to the desirable fan speed position.
AUTO HI MED
Page 9
button or the button.
LO