KitchenAid KEBI141D Technical Education page 35

6. To remove the convection fan motor:
a) If not already done, remove the con-
vection cover and the convection bake
element from the rear of the oven liner
(see page 4-14).
b) Use a 10 mm (7/16˝) socket and re-
move the hex nut from the convection
fan. NOTE: The nut has a left-rotation
thread for removal.
c) Remove the three front convection fan
motor screws from the rear of the oven
liner.
d) Pull the oven out of its mounting loca-
tion (see page 4-4, steps 1 through 3 for
the procedure) so that you can access
the rear cover.
e) Remove the rear cover from the oven
(see page 4-5 for the procedure).
All manuals and user guides at all-guides.com
Convection
Fan
10 mm
(7/16˝)
Hex Nut
Convection
Fan Motor
Front Screw
(1 of 3)
4-15
f) Remove the two rear convection fan
motor mounting screws from the oven,
and remove the motor from the rear of
the oven.
Convection Fan Motor
Rear Screw (1 of 2)
Convection Fan
Motor Terminals
Convection
Fan Motor