Removing The Oven Door Latch Assembly - KitchenAid KEBI141D Technical Education

REMOVING THE OVEN DOOR LATCH ASSEMBLY

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so could result in death or
electrical shock.
CAUTION: When you work on the built-in
oven, be careful when handling the sheet metal
parts. Sharp edges may be present, and you
can cut yourself if you are not careful.
1. Disconnect the electrical power to the
oven.
2. Remove the control panel from the oven
(see page 4-2, steps 1 through 6 for the
procedure).
All manuals and user guides at all-guides.com
4-7
3. Open the oven door and remove the two
front oven door latch mounting screws
from the air vent.
Oven Door Latch Assembly
2 Air Vent Screws
4. Remove the wires from the terminals of
the solenoid and the latch and door
switches.
Latch Switch
2 Top Screws
5. Remove the two top screws from the oven
door latch assembly and remove the as-
sembly.
Air Vent
Solenoid
Door Switch