KitchenAid KEBI141D Technical Education page 29

d) Pull the halogen socket assembly out
of the oven liner and cut the wires near
the socket terminals.
Cut Wires Here
e) Cut the new halogen light socket wires
to the proper length.
f) Remove 3/8˝ of insulation from the cut
wires on the wire harness and the halo-
gen light socket. Splice the halogen
light socket wires to the harness wires,
and twist two wire nuts over the bare
wire ends.
All manuals and user guides at all-guides.com
4-9
4. To remove the oven temperature sen-
sor:
a) Remove the two mounting screws from
the oven temperature sensor and pull
the connector out of the mounting hole
in the oven liner.
Screws
b) Disconnect the sensor connector from
the main wire harness connector.
Sensor
Connector
Oven
Temperature
Sensor