Table of Contents
Advertisement
TX-34P180R
2 SERVICE HINTS
2.1.
HOW TO REMOVE THE REAR
COVER
1. Remove the 9 screws as shown in Fig. 1.
2.2.
HOW TO MOVE THE CHASSIS
INTO SERVICE POSITION
1. Hold and lift the rear of the chassis and gently pull the
chassis towards you as shown in Fig. 3.
2. Release the respective wiring clips and rotate the chassis
vertically through 90° anticlockwise.
3. After servicing replace the bead clamper and ensure all
wiring is returned to its original position before returning the
receiver to the customer.
Fig. 1
(Fig. 3)
2.3.
HOTEL MODE
Purpose
1. At Hotels, this Mode prevents the customer from changing
the TV preset data such as Channel preset data.
Note: This Mode is useful for Hotels. You should not get
into "Hotel mode" with Normal use.
Operation
1. To get into "Hotel Mode", press the remote control "Recall"
button and Channel up "[+/
simultaneously, after setting the "Off-Timer" mode.
2. In this mode, the Channel up and down Function will be
enabled as normal and the maximum volume level for this
mode is set at the current volume level, i.e. the setting at
the level before entering the mode. However, other
functions will bedisabled.
3. To exit this mode, exit "Off-Timer" mode and the "Volume
Down [-/
]" key simultaneously.
* This information isinformed by Service Manual only.
6
]" key on the TVset
Advertisement
Table of Contents
