Service Hints; Service Position For E-Board; Factory Mode Adjustment - Panasonic TC-21GX30P Service Manual

2 Service Hints

2.1.

Service Position for E-Board

1. Remove the back cover.
2. Stand the TV set as shown in Fig. 2.
3. Remove the A-Board from the TV set by pulling the main board out as shown in Figure 2.
2.2.

Factory Mode Adjustment

1. Adjustment.
a. Set Timer ON (30 minutes)
Press remote's RECALL & panel's vol down key simultaneously to select service mode.
b. CHK should appear on right side of TV screen.
After few seconds CHK 1 should appear on right side of TV screen.
NOTE :
To move from CHK 1 to CHK 2 mode, etc, please follow below rotation:-
c. CHK 1
Press digit key "4" to move option mode forward.
Press digit key "3" to move option backward.
The function rotation will be as follows :-
Fig. 2
5
TC-21GX30P