Epson LQ-2550 User Manual page 214

ESC N
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The variable n is the number of lines skipped between the last line
printed on one page and the first line on the next page. For example,
with the standard settings for line spacing (l/6-inch), and page length
(66 lines), ESC N 6 prints 60 lines and then skips 6. This setting is
cancelled by ESC C or ESC C 0. The value of n must be from 1-127.
Overrides the SelecType skip over perforation setting.
ESC 0
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Cancels the skip over perforation set by ESC N. Overrides the
SelecType skip over perforation setting.
Line feeding
LF
Format:
A S C I I c o d e : L F
Decimal:
Hexadecimal: 0A
Comments:
When this command is received, the data in the print buffer is printed
and the paper advances one line in the current line spacing.
8-14
ESC N
27 78
1B 4E
ESC 0
27 79
1B 4F
10
Set Skip Over Perforation
n
n
n
Cancel Skir, Over Perforation
Line Feed
Command Summary