Epson LQ-2550 User Manual page 81

To change and save a macro, perform the steps described below.
1. Select the CHhNGE MACRD mode from the SelecType main menu. (See
the instructions for selecting a main menu mode earlier in this
chapter.)
The display shows:
2. Activate this mode by pressing the b button directly beneath the
display.
The display changes to:
Note: The + icon preceding FONT indicates that you can change to one
of the other options, such as right margin or color, by pressing the V
or A button to display the option.
3. To select a font, press the ä button.
The display changes to:
Press the V button to shift through the available fonts. (Press the A
4.
button to shift through the fonts in reverse order.)
For the purposes of this example, display Sans Serif by pressing
the V button.
The display changes to:
The display changes to:
Note: At this point you can again change the option at the left side of
the display by pressing the A or V button. If you do this, begin again
at step 3 to change the settings for the option.
Using the Printer
Roman b
3-17