HAMPTON BAY YG763-BN Use And Care Manual page 15

Assembly — Installing the Light Kit (continued)
12
Installing the plastic shade
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Position the notches (NN) in the outer rim of the
plastic shade (K) so they line up with the tabs (OO) on
the inside of the rim on the 20W LED light kit (J).
Carefully lift the plastic shade (K) up inside the 20W
LED light kit (J) and secure it to the fan by turning the
plastic shade (K) clockwise until snug. DO NOT
OVERTIGHTEN.
F
OO
15
Please contact 1-855-HD-HAMPTON for further assistance.
J
NN
K
HAMPTONBAY.COM