Life Fitness 5500HR Service Manual page 16

Life Fitness Model 5500HR Treadmill
DIAGNOSTIC TESTS ( Continued )
The SPEED DOWN
⇒ CHECK THE DISPLAY/KEYPAD FUNCTIONS
⇒ REVIEW STATISTICS
⇒ IDENTIFY SOFTWARE VERSION
Start with the Life Fitness model 5500HR treadmill turned OFF at the I/O switch.
To advance through this test, use the ENTER KEY.
Power up the unit while holding the SPEED DOWN KEY ∇. All LED's on the Display Console will light.
Press ENTER once, and Console should begin to scroll through lighting LED's individually.
Press ENTER a second time and this will bring you to the Keypad test. By pressing each key, a pattern
of LED's will light. This shows that the button is responding.
Press ENTER a third time and the word Stats will appear in the display readout. Pressing the SPEED UP ∆ KEY
will scroll you through the individual statistics. (To scroll back through the statistics, press the SPEED DOWN ∇
KEY)
1st Press
2nd Press
3rd Press
4th Press
5th Press
Press ENTER a fourth time and this will give you the Software Version on the treadmill.
For example, the Display will read 2.7EE1.
Press ENTER a fifth time and "Units" appears in the Display readout. Pressing the SPEED UP ∆ KEY enables
you to change the unit of measure from ENGLISH/ENGLISH to ENGLISH/METRIC. Pressing the SPEED DOWN
KEY ∇ enables you to change the unit from ENGLISH/METRIC to ENGLISH/ENGLISH. Press the CLEAR key 1
time to verify the default after you have chosen a setting.
Press ENTER a Sixth time and "Lang" appears in the Display readout. Pressing the SPEED UP ∆ KEY enables
you to change from English to a Foreign language.
At any time in this Test Mode you can go back to the start by pressing the CLEAR/PAUSE KEY.
2
KEY is used for the following testing information:
Distance LED Lit:
Time LED Lit:
Incline LED Lit:
Cal/Hr LED Lit:
Speed LED Lit:
2.7 Software Version
E English Measurement (miles)
" M " would designate Metric Measurement (kilometers)
E English Language
1 120V
Miles
Motor ON Time (hours)
Lift Motor run time
Lift Motor (percentage of elevation usage)
Current limiter Activation
(Continued)