Panasonic ES‑LV9E Operating Instructions Manual page 27

Problem
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Operating time is short
even after charging.
Action
Clean the beard trimmings
from the shaver.
When the shaver is
extremely dirty, remove the
foil frame and wash with
water.
(See page 18.)
Replace the system outer
foil and/or inner blades.
Expected life of system
outer foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Apply oil.
This can be improved by
cleaning every time after
shaving.
When the number of
operations per charge starts
to decrease, the battery is
nearing the end of its life.
Problem
Shaver does not
operate even after
charging.
The driving sound
changes while shaving.
Makes a loud sound.
The odor is getting
stronger.
Action
Use the appliance in an
ambient temperature
approximately 5 °C or higher.
The battery has reached the
end of its life. In this case, the
shaver will not operate when
the power is turned on with
the AC adaptor connected.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush. (See page 19.)
This can be improved by
cleaning every time after
shaving.
27