Panasonic ES‑LV9E Operating Instructions Manual page 17

Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger
and plug the adaptor into
a household outlet�
(See page 12�)
• Check that the charge status
lamp ( ) is glowing.
• When the LOW lamp or the
STATUS lamp lights up, see
page 22.
2
Press �
The CLEAN lamp and the DRY lamp glow, and the
"AUTO" mode will start after approximately 6 seconds.
• It is not possible to change the mode after the
"AUTO" mode has started.
Clean
10 min
* When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower): 170 min
3
Remove the adaptor after the selected
mode is completed�
1
1
2
Charge
Dry
80 min*
0 to 60 min
Clean the shaver with water or with the
cleaning brush once per month. (See
pages 18 to 19.)
The main unit neck section (a), inner
blade attachment part (b), trimmer,
system outer foil gaps, etc. cannot be
cleaned with the self‑cleaning recharger.
Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver,
and the mode can be changed by pressing the
SELECT button.
AUTO mode
Charge mode
(Clean/Dry/
(Charge)
Charge)
Notes
• Do not press the cleaning liquid unit removal button
during cleaning as the cleaning liquid may spill
causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under
extreme low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.


Dry/Charge
mode
(Dry/Charge)
17