Panasonic ES‑LV9E Operating Instructions Manual page 13

• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
Charging without the self-cleaning recharger
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug the adaptor into a
household outlet�
3
Disconnect the adaptor
after charging is completed�
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in
advance.
(See page 17.)
• Remove the AC adaptor from the self‑cleaning recharger.
1
Press the cleaning
liquid unit removal
button (1) and
remove the cleaning
liquid unit (2) on a
hard, flat surface.
2
1


• When the self‑cleaning recharger is lifted, or on
the soft surface such as carpets, the lock release
lever will not fit in the recharger properly. In that
case, the cleaning liquid unit cannot be removed.
2
Pour tap water (1)
and detergent (2)
into the cleaning
liquid unit�
• Be careful not to let the
water rise above the
maximum water line (a).
• Pour the entire packet
of detergent.
3
Slowly insert the
cleaning liquid unit
into the self-
cleaning recharger
until it clicks�
Notes
• To replace the cleaning liquid, see page 20.
• Only use self‑cleaning recharger detergent for
Panasonic shavers.
Not doing so may cause malfunction or failure.
• Do not tilt the self‑cleaning recharger.
Doing so may cause spill or the number of days that
cleaning liquid can be used reduce.
 

13