Table of Contents
Advertisement
Chapter 4. Remote Operation
Network Settings
To configure the VP3520's network connection settings, log in the web
console, and then go to System > Network.
IP Settings
Mode: Configure the method to which the VP3520 obtains an IP address
and connects to the network.
DHCP: Select this option for the connected network switch to
dynamically assign an IP address, subnet mask, gateway, and DNS to
the VP3520.
Manual: Select this option for the VP3520 to use a fixed IP address.
Specify the IP address, subnet mask, and default gateway.
Browser
Timeout: Sets the duration of time that a web browser waits to obtain
connection to the VP3520 before terminating the request.
50
Advertisement
Table of Contents
