Adjusting the label position
To adjust the printing position for labels (for example, on a form
that includes a label in addition to standard printing) you can
define the label size and location using the Forms w/labels
setting in Default-setting mode. By defining the position of the
label, you tell the printer where it needs to raise the print head to
accommodate the greater thickness as it prints over the label.
First use SelecType to turn on the Forms w/labels setting (and
to define the page length, if necessary, for the paper loaded on
the front or rear tractor). See page 84 for instructions.
Then use Default-setting mode as described on page 96 to
choose the desired position for these settings:
Label base position
Label top position
Label length
Label left position
Label width
Base sheet PG (Base sheet PG position number)
Label paper PG (Label paper PG position number)
32
Paper Handling