Replacing A Toner Cartridge - Epson ColorPage 8000 Quick Reference Manual

Replacing a Toner Cartridge

Replacing a Toner Cartridge
installation
window
When the printer runs out of toner, the control panel
display indicates the color of the toner cartridge that needs
to be replaced. Make sure you have the correct replacement
cartridge, as shown in the table, and then follow these steps.
Avoid touching the toner. If toner gets in your
eyes, flush them immediately with cold water. If
it gets on your skin or clothes, wash it off with
soap and cold water. Keep toner cartridges out of
the reach of children.
1
Open the front cover.
2
Check which of the four colors appears in the cartridge
installation window. If you see the color that you need
to replace, go to step 4. If you see a different color, go
to the next step.
3
Push up the switch
located above the
cartridge, then release it.
Turn the knob until it
stops. Repeat this step
until the cartridge you
want to replace appears
in the window.
4
Turn the cartridge
counterclockwise
90 degrees. Then
pull it out of the
slot and dispose of
it carefully.
front cover
switch
knob
control panel
display
Toner Cartridge (Cyan)
Toner Cartridge (Magenta)
Toner Cartridge (Yellow)
Toner Cartridge (Black)
5
Take a new cartridge out of its package and gently
shake it back and forth and front to back to distribute
the toner evenly.
6
Hold the cartridge with the arrow facing up and insert
it as far as possible into the cartridge slot.
7
Turn the cartridge clockwise 90 degrees, pushing it the
rest of the way into the slot. Then close the front
cover.
Make sure you turn the cartridge all the way, or
toner may leak.
1
S050018
S050017
S050016
S050019