Epson ColorPage 8000 Quick Reference Manual page 12

Error message list (continued)
Messages
Mem Overflow
Replace Oil Roll
Replace Photocondctr
Replace Waste T Box
Error message list (continued)
Messages
< CMYK > Toner Out
Service req e
<error number>
Description
The printer doesn't have enough
memory available for the current
print job.
The fuser oil roll is empty.
The photoconductor unit has reached
the end of its service life.
The waste toner collector is full.
Description
The indicated toner cartridge is empty.
A controller error or a print engine
error has been detected.
Action
Press the Continue button on the control panel.
If the message remains, reset the printer by
holding down the Alt and Reset buttons.
If the same message appears when you try
printing again, you may need to reduce the
number or size of graphics or fonts, lower the
resolution, or add memory to your printer.
Replace the fuser oil roll (see page 4).
Replace the photoconductor unit (see page 2).
Replace the waste toner collector (see page 3).
Action
Replace the indicated toner cartridge (see page 1).
Write down the error number and turn off the
printer. Wait at least 10 seconds and then turn it
back on. If this error still appears, turn off the
printer, unplug the power cord, and contact
your dealer.
10