Table of Contents
Advertisement
SuperServer 2029BT-DNR/DNC0R User's Manual
SIOM Card
The Supermicro Input/Output module (SIOM) card provides options for network connection.
It is inserted into a SIOM slot on the motherboard. This installation is usually performed by
a system integrator or manufacturer.
Installing the SIOM Card Before Installing the Motherboard
1. Insert the SIOM card into the motherboard as shown.
2. Secure it with a screw. Note: Torque range is 0.20-0.28 Nm.
3. Install the covering bracket on the rear of the node drawer.
4. Install the motherboard including the other screw on the SIOM card.
Figure 3-14. SIOM Card Position on Node Drawer Rear
Installing the SIOM Card After the Motherboard
Remove the riser card bracket, remove the entire chassis rear, then follow the above
procedure.
1
Screw
4
3
50
Hole for Screw
2
Screw
Advertisement
Table of Contents
