Switching Between Continuous Paper And Single Sheets - Epson ActionPrinter 3260 User Manual

Epson actionprinter 3260: product information
Hide thumbs Also See for ActionPrinter 3260:
Table of Contents

Advertisement

2. Make sure the paper-release lever is lowered to the
single-sheet position.
3. Hold the tractor as shown and fit the edges of both sides
into the slots at the back of the printer. Then lift it straight
up until you hear the unit snap into place.
4. Raise the paper-release lever and push it firmly into the
continuous-paper position.
Switching Between Continuous Paper and
Single Sheets
When you use the push tractor, you can easily switch to
single-sheet printing without removing the continuous paper
supply.
Switching to single sheets
Here is how to switch from continuous paper to single sheets:
1. If you have a printed document still in the printer, tear off
the printed pages and then press the FF and FONT buttons
at the same time. This moves the remaining paper back to
the paper-park position.
24-Pin Printers
back-feeding too many sheets can cause a paper jam.
Never
labels backward. They can easily peel off
feed
their backing and jam the printer.
2. Lower the paper-release lever to the single-sheet position.
If you lower the paper-release lever while continuous
paper is still loaded, the printer beeps and the READY
light goes off. If this happens, raise the paper-release lever
and press the FF and FONT buttons at the same time to
reverse the paper to the paper-park position. You can then
lower the lever again.
3. The printer is ready to print. When it receives data, it
automatically loads a single sheet from the paper cassette
and begins to print.
Switching to continuous paper
To switch from single sheets back to continuous paper,
follow these steps:
If a single sheet is in the paper path, press the FF button to
eject it.
Push the paper-release lever firmly into the
continuous-paper position.
Caution:
If you raise the paper-release lever when a single
the paper path, the printer beeps and the READY light
in
goes off In this case, lower the paper-release lever and
press
to eject the page completely. You can then raise
FF
the lever again.
The printer is ready. When the printer receives data, it
loads continuous paper from the push tractor
automatically and begins to print.
1/94
Action Printer 3260
sheet is
AP-3260-11

Advertisement

Table of Contents
loading

Table of Contents