Character Tables; The Control Panel; Indicator Lights - Epson ActionPrinter 3260 User Manual

Epson actionprinter 3260: product information
Hide thumbs Also See for ActionPrinter 3260:
Table of Contents

Advertisement

ActionPrinter 3260

Character Tables

These character tables are selected with the default-setting
mode or by using a software command. All the tables are the
same for hex codes 00 through 7F. Therefore, only first table
is shown completely. The rest of the tables show only the
characters for hex codes 80 through FF.
For all character tables except the italic character table, the
ESC 6 and ESC 7 software commands let you select whether
hex codes 80 to 9F are characters (ESC 6) or control codes
(ESC 7).
The tables with an * after the table name are available in the
European version only.
PC 437 (USA, standard Europe)
Character available with ESC (
To print the characters in the table below, you must first send
the ESC ( ^ command.
AP-3260-4
^

The Control Panel

You can control the basic operations-form feed, paper
loading and ejecting, and font selection-with the buttons on
the control panel. The indicator lights help you monitor the
printer's status.
EPSON

Indicator Lights

The control panel lights provide information on certain
printer conditions and settings.
READY
The READY light is on when the printer is ready to receive
data from the computer. The READY light flashes under
these conditions:
When the printer runs out of paper
optional push tractor only)
waits until the print head cools and then resumes
printing.)
When an error occurs, the READY light goes off.
FONT
The two font lights indicate the current font setting. These
lights change when you press the FONT button. Look at the
font menu on the control panel to determine which font is
selected.
Buttons
The two buttons on the control panel perform different
functions depending on the printer mode.
FONT
Press the FONT button to move through the font choices on
the font menu. The two FONT indicator lights indicate the
current selection.
Hold down the FONT button while you turn on the printer to
enter the default-setting mode. When you are in the
default-setting mode, use this button to make your selection.
1/94
FONT lights
FONT button FORM FEED
button
24-Pin Printers
READY
light

Advertisement

Table of Contents
loading

Table of Contents