Epson ActionLaser 1000 Installation Manual page 7

11. Press b twice to save the CH O PS setting.
12. Press 4 twice to return to the READY message.
13. Press the ON LINE button.
Note:
The READY message may not show O PS (indicating the
optional interface and
is sent from your computer to the printer each time you turn on
your
printer.
14. Make sure that AppleTalk is active in the Chooser under the
Apple menu on your Macintosh.
15. Click LaserWriter in the Chooser menu. EPL-8000 appears
in the Select a LaserWriter box. Click on EPL-8000 and then
close the Chooser.
Note:
If
the LaserWriter printer
computer, you can find it on one of your Macintosh System disks.
your computer manual instructions
Use
Macintosh.
16. Begin printing using your application software.
until after your first
PostScript)
driver is not yet installed on your
6
print
if on your
to install
job