Installing The Interface Card - Epson ActionLaser 1000 Installation Manual

Installing the Interface Card

1. Make sure that both the printer and computer are turned off
and that all power and interface cables are removed from
the printer.
2. Turn your printer so that its interface cover or shield plate
faces you.
3. Use a screwdriver to remove the screws securing the cover or
shield plate; then lift it off.
4. Slide the interface board into the grooves in the interface slot.
Push it in firmly to make sure it connects to the printer's
internal socket.
Caution:
Avoid touching the printer circuits or card circuit board
contacts. Otherwise, you may damage them.
ActionLaser 1000/1500
ActionLaser 1000/1500
2
EPL-8000
EPL-8000