Related Documentation - Epson Stylus Scan 2500 Product Information

Epson stylus scan 2500: product information

Hide thumbs Also See for Stylus Scan 2500:

Table of Contents

Turn off the EPSON Stylus Scan, then follow these steps to

clean the guide:

1. Disconnect the automatic document feeder's connector

from the EPSON Stylus Scan's option interface.

2. Lift the automatic document feeder straight up to remove it.

3. Remove the paper support.

4. Place the automatic document feeder on a flat surface and

turn it over. Locate the two white tabs at one end of the

paper path guide. Pull the tabs slightly up, then push them

through the brackets.

5. Pull the paper path guide up and out.

6. Using a soft, dry cloth, gently wipe any dust from the

guide's transparent plastic sheet. Be careful not to scratch

the guide.

7. Reattach the paper path guide. Insert the transparent plastic

sheet under the white mat.

8. Insert the guide's tabs through the brackets at the back of

the automatic document feeder. Push until the tabs clip into

place.

Related Documentation