Related Documentation - Epson Stylus CX5000 Series Manual

Epson stylus cx5000: specifications

Hide thumbs Also See for Stylus CX5000 Series:

Table of Contents

Transporting the CX5000 Series

If you need to ship your CX5000 Series, you must prepare it

for transportation by packing it in its original box or one of a

similar size.

1. Turn off the CX5000 Series.

2. Remove any paper from the sheet feeder and close the paper

support.

3. Unplug the power cord from the electrical outlet. Then

disconnect the USB cable from the CX5000 Series.

4. Open the scanner section and make sure the ink cartridge

holder is in the home position on the right.

5. Secure the ink cartridge holder (print head) to the case with

tape.

Caution:

Be sure to remove the tape after installing the printer in its new

location, but before you turn it on.

6. Close the scanner section, push in the output tray extension,

and close the output tray.

7. Repack the CX5000 Series in the original box using the

protective materials that came with it.

Keep the CX5000 Series level as you transport it.

After transporting the CX5000 Series, remove the tape

securing the print head, plug in the CX5000 Series, and turn

it on. If you notice a decline in print quality, clean the print

head (see page 12); if output is misaligned, align the print

head (see page 16).

Related Documentation