Advertisement
Quick Links
Wireless par can with battery
MJ-3118B
User Manual
PROFESSIONAL LED LIGHTING
======
========
Thank you for choosing our LED wireless battery par light. For the sake of
your safety, Please read and follow these instructions carefully and keep
this manual in a safe place for future reference.
Advertisement
Related Manuals for MJ LED LIGHTNING MJ-3118B
Summary of Contents for MJ LED LIGHTNING MJ-3118B
- Page 1 Wireless par can with battery MJ-3118B User Manual PROFESSIONAL LED LIGHTING ====== ======== Thank you for choosing our LED wireless battery par light. For the sake of your safety, Please read and follow these instructions carefully and keep this manual in a safe place for future reference.
- Page 2 Before open the LED par light and if you want to do the repair work, please Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First make sure the power source is at the separation condition. Charge before use. Plug in Power cord. Turn off Power Switch and Turn off other switch to charge.
-
Page 3: Charge Warning
Features ● Power supply: AC100V-240V There are three buttons on the rear panel of the lighting. One is for power, one is wireless signal and the other is for charger. ● Frequency: 50-60Hz ● When use the fixture with DMX, not wireless, please switch the signal button ●... - Page 4 ● Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to For Battery Function and Charge the point they exit from unit. ●...
- Page 5 3. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller. Set your desired DMX address following the setup LED display ON/OFF specifications that come with your DMX controller. TENP LED board temperature 4.
Need help?
Do you have a question about the MJ-3118B and is the answer not in the manual?
Questions and answers