Summary of Contents for MJ LED LIGHTNING MJ-2042CR
Page 1
LED OUTDOOR WIRELESS BATTERY PAR-1218 MJ-2042CR User Manual PROFESSIONAL STAGE LIGHTING ======= ======== Thank you for choosing our outdoor LED wireless par can with battery light. For the sake of your safety, Please read and follow these instructions carefully and keep...
Most important: FIRST CHARGE THE FIXTURES FOR 6-8 Hours on the First Charge before use. Plug in Power cord. Turn ON charger Switch to charge. Charge Warning: Introduction 1.For carton box: Unpacking: Thank you for purchasing this product, all products has been thoroughly tested Please do NOT put in carton box while charging.
There is one buttons on the rear panel of the lighting. it is for power ON/OFF Features ● When use the fixture with DMX, not wireless, please set the 2.4G signal menu ● Power supply: AC100V-240V ● Frequency: 50-60Hz for “off” ●...
● Cleaning -The fixture should be cleaned only as recommended by the Remote Operation manufacturer. See “Cleaning” for details. ● Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
Page 6
R000—R255 (Red dimming by hand) R000 4. The unit can automatically recognize the DMX signal once the DMX connection is done. G000—G255 (Green dimming by hand) G000 B000—B255 (Blue dimming by hand) B000 DMX Linking U000—U255 (White dimming by hand) U000 To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible.
Need help?
Do you have a question about the MJ-2042CR and is the answer not in the manual?
Questions and answers