Channel Menu - Strong FC5433 User Manual

Balance
Auto Volume control
S/PDIF type
S/PDIF Delay
Audio delay

7.4 Channel menu

Press to display the main menu. Press   to select Channel in the main menu, after that press OK
to enter.Press   to choose the menu and press OK to enter the sub-menu.
NOTE:
Channel scan
Channel List
EPG
Channel organiser
Channel diagnostics (on digital TV channels)
Teletext
7.4.1 Channel organiser
Select "Setting" -> "Channel" -> "Channel organiser". You fi nd 4 submenus: Channel skip, Channel sort,
Channel edit, Channel delete
7.4.1.1 Channel skip
Enter Channel skip. If you want to hide the channel from the channel list, just select it.
7.4.1.2 Channel sort
Enter Channel sort. There are two types: Channel swap and Channel insert
Channel swap: to exchange the channel order of two channels of the same type, fi rst need to select
the two channels to be exchanged, press the OK key to exchange the order of two channels. When the
number of channels exceeds one page, the Quick jump function will take eff ect, which is used to quickly
jump to the channel number entered by the user.
Channel insert, which is used to adjust the order of selected channels. After selecting the channel to be
inserted, move the cursor to the place to be inserted and press the RED button to insert
Control the sound balance between the right and left loudspeaker
(earphone).
Adjust the volume corresponding to the input audio level. Options are ON
and OFF.
When connected to a digital amplifi er you can select PCM to have all audio
converted to a 2-channel stereo. Select Auto to keep the audio settings as
they are or OFF to turn off .
Here it is possible to set up S/PDIF Delay and Speaker Delay.
Adjust sound and picture if they are not in sync with each other. For example
when you use audio receiver or soundbar.
This function is only available in TV mode.
Scan for all available analogue and digital channels.
Show all searched channels in a list.
Press OK to enter the Programme Guide menu.
Skip, sort, edit and delete channels (see chapter 7.4.1 for more details)
Press OK  to display some signal information on current digital channel,
such as signal strength, Frequency etc.
Use  to select the teletext language.
11