Table of Contents
Advertisement
1. Ensure you have:
An Ethernet cable long enough to reach your TV
„
A router or modem with an available Ethernet port
„
A highspeed Internet connection
„
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the
TV.
3. Use Ethernet part of menu to configure the connection (if required).
Connecting to a wireless network
To connect to a wireless network:
1. Ensure you have:
A router broadcasting a 2.4GHz wireless signal
„
A highspeed Internet connection
„
2. Select your Wi-Fi network from the Available networks list and enter password for
connection.
3. Use other options of menu to configure the connection (if required).
Please refer to chapter 6 to read more about Smart features of your TV.
5.0 LIVE TV USAGE
Select Live TV application from Home screen or TV or Channels from input menu to watch live
TV channels. Press OK to start this application.
This application gives you access to live TV to watch and enjoy your favorite TV and radio
programs from TV sources (Aerial/Antenna, Cable or several of Satellites) of your choice.
In case if you skipped DTV installation during FTI and enter application for the first time,
application will recommend to perform channel scanning and installation.
NOTE:
5.1 Channel installation
Exist two ways to install channels.
Way 1 - through TV menu from Channels chapter
This is simple procedure to add channels.
12
Please note, that nothing to watch, if no channels were scanned and
installed.
www.strong.tv
Advertisement
Table of Contents
