Connecting To A Wired Network; Connecting To A Wireless Network; Network Settings - Strong FC5433 User Manual

NOTE:
NOTE:

5.1 Connecting to a wired network

NOTE:
To connect to a wired network
1. Ensure you have:
An Ethernet cable long enough to reach your TV
n
A router or modem with an available Ethernet port
n
A highspeed Internet connection
n
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the Network Con guration menu to confi gure the TV.

5.2 Connecting to a wireless network

NOTE:
To connect to a wireless network:
1. Ensure you have:
A router broadcasting a highspeed wireless signal
n
A highspeed Internet connection
n
2. Use the Network Con guration menu to confi gure the TV.

5.3 Network settings

Internet connection
Interface
Wireless settings
IP settings
Information
To access the Internet, you must subscribe to a highspeed broadband
Internet service with your Internet service provider.
Instructions below are just the usual ways to connect your TV to a wired or
wireless network. The connection method may diff er depending on your
actual network confi guration. If you have any questions about your home
network, please refer to your Internet service provider.
The graphics are for representation only.
The graphics are for representation only.
With this option you can turn your internet connection ON/OFF
Choice of Wifi or wired network
In this menu you can scan Wifi network and then choose your own network.
After choosing your own network you have to enter the code to connect to
Wifi network.
In this menu you can choose Automatic or Manual IP address.
Here you will fi nd information about your IP address, User ID and BSSID (mac
address)
Fig. 6a
Fig. 6b
9