Stabilization Function - Kongsberg Simrad SX90 Reference Manual

Fish-finding sonar

Hide thumbs Also See for Simrad SX90:

Table of Contents

Simrad SX90 Reference Manual

To draw the track line use the settings on the

located in the

Display Options

Minute Markers

you have sailed in the last few minutes. The minute markers are shown as small circles on

the vessel's track line. The

Stabilization function

The SX90 system is provided with a built-in motion sensor to provide electronic

stabilization of the sonar beams. It is placed inside the Motor Control Unit. For improved

operational accuracy, an external motion reference unit (MRU) can be used. If the sensor is

malfunctioning the input can be disabled.

This function is opened from the

function allows you to enable or disable the input from the motion sensor.

Stabilization

to enable the input.

to disable the input.

If you disable the input from the sensor, the beams will not be compensated for pitch and

toll movements.

During normal operation, always keep

setting. Turning stabilization off may be helpful if you suspect that the sensor provides you

with bad data, or if you need to troubleshoot the interface. If you turn stabilization off and

this improves the echo presentation you must check your motion sensor.

dialog box. The

function adds markers to the track line. These markers indicate how far

Minute Markers

dialog box is located on the

Display Options

function is located on the

set to On. This is the default

Stabilization

Visual Objects