Kongsberg SIMRAD SX90 Manual
  1. Manuals
  2. Brands
  3. Kongsberg Manuals
  4. Fishing Equipment
  5. Simrad SX90 Series
  6. Manual
Kongsberg SIMRAD SX90 Manual

Kongsberg SIMRAD SX90 Manual

Hide thumbs Also See for SIMRAD SX90:
Table of Contents

Advertisement

Quick Links

Download this manual
PUBLIC
This document describes the changes introduced with the new software
version.
•
: SX90
Product
•
: 22.1
Software version
•
Upgrade from version
This software controls all functionality in the SX90 system. This
includes transmission and reception, interfaces with external
peripherals and sensors, and all user interface.
A firmware update for the Transceiver Unit is not included with this
release.
Additional end-user documents related to the SX90 system can be
found on our website. This includes publications that are translated to
other languages. Selected publications are also provided on IETM
(Interactive Electronic Technical Manual) formats.
• https://www.kongsberg.com/sx90
Simrad SX90
Fish-finding sonar
Software Release Note
: 21.13
March 2022 © Kongsberg Maritime AS
Release 22.1
316866/R

Advertisement

Table of Contents
loading

Related Manuals for Kongsberg SIMRAD SX90

Summary of Contents for Kongsberg SIMRAD SX90

  • Page 1 Additional end-user documents related to the SX90 system can be found on our website. This includes publications that are translated to other languages. Selected publications are also provided on IETM (Interactive Electronic Technical Manual) formats. • https://www.kongsberg.com/sx90 316866/R March 2022 © Kongsberg Maritime AS...
  • Page 2 Kongsberg Maritime disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment. Disclaimer Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly stated, but does not accept liability for any errors or omissions. Support information If you require maintenance or repair, contact your local dealer.

  • Page 3: Table Of Contents

    Software Release Note Table of contents SOFTWARE CHANGES .............. 5 DO I NEED TO UPGRADE? ............7 SOFTWARE LICENSES .............. 8 SOFTWARE INSTALLATION............9 Removing the operating software ..................9 Installing a new version of the operating software ............11 Settings you need to restore after a software upgrade .............12 END-USER DOCUMENTATION ..........
  • Page 4 Simrad SX90 316866/R...

  • Page 5: Software Changes

    Software changes Software changes This software update solves a number of software bugs that have been reported by our users, or detected during our own product testing. New functionality is also introduced. Note If you upgrade from version 3.1.8 or earlier make sure to read the release note for software version 21.13.21.
  • Page 6 Simrad SX90 Software Release Note Additional functionality added to Operating Panels Mk2 and M3 In the page for Mk2 and M3 youi can now choose to use one of Operating Panel the buttons to delete the oldest marker. Operating Panel Mk2, page 19...

  • Page 7: Do I Need To Upgrade

    Do I need to upgrade? Do I need to upgrade? This software update introduces new functionality. It also addresses software bugs that have been reported by our users, or detected during our own product testing. We recommend that all users update their software. 316866/R...

  • Page 8: Software Licenses

    Simrad SX90 Software Release Note Software licenses The Simrad SX90 is not a licensed product. The SX90 system does not need any software licenses to operate. However, specific software license codes "unlocks" additional functionality. The software license is a 32 character hexadecimal string based on the hardware identifier ( ).

  • Page 9: Software Installation

    Registered dealers and distributors can download the new software version from the "Simrad Dealer Club". To access the "Simrad Dealer Club", visit our website. • www.kongsberg.com/sdc Topics Removing the operating software, page 9 Installing a new version of the operating software, page 11...
  • Page 10 Simrad SX90 Software Release Note Context Removal of the software is done using functionality provided by the operating system. Procedure Turn on the Processor Unit. Select to turn off the system. Power off In the dialog box, select to close the...

  • Page 11: Installing A New Version Of The Operating Software

    Software installation Installing a new version of the operating software A dedicated wizard is used to install the software. The operating software for the SX90 system must be downloaded on a separate computer. Prerequisites The following specific items are required for this task: •...

  • Page 12: Settings You Need To Restore After A Software Upgrade

    Simrad SX90 Software Release Note Close File Explorer. Remove the USB flash drive. On the Processor Unit desktop, double-click the SX90 icon to start the program. If applicable: Disconnect the keyboard and the mouse from the Processor Unit. Settings you need to restore after a software...

  • Page 13: End-User Documentation

    Additional end-user documents related to the SX90 system can be found on our website. This includes publications that are translated to other languages. Selected publications are also provided on IETM (Interactive Electronic Technical Manual) formats. • https://www.kongsberg.com/sx90 316866/R...

  • Page 14: Updated Functions And Dialog Boxes

    Simrad SX90 Software Release Note Updated functions and dialog boxes This new software version has resulted in changes to some of the functions and dialog boxes in the SX90 user interface. Topics User Settings Setup page , page 14 Units page, page 15...

  • Page 15: Units Page

    Updated functions and dialog boxes saved user settings. These settings can be related to different operations, environmental conditions or basic personal preferences. By default, information about the current range, bearing and tilt will not be saved. On the User Settings page, tick the box to include range, bearing and tilt information the next Setup time you save the user settings.
  • Page 16 Simrad SX90 Software Release Note Description The SX90 system is prepared to work with several international standards for units of measurements. Use the options to select the units of measurements you want to work with. The Units SX90 system uses them in all presentations. You only need to define them once. Use the drop-down lists provided to make the selections.

  • Page 17: New Marker Dialog Box

    Updated functions and dialog boxes New Marker dialog box dialog box allows you to create a new marker based on the known depth New Marker and geographical position of a new target. How to open dialog box is opened from the button in the menu.
  • Page 18 Simrad SX90 Software Release Note functionality provided by the SX90 system can be accessed using the trackball on the Operating Panel and the menu system shown in the display presentation. The SX90 system supports three different operating panels. These are referred to as "Mk1", "Mk2"...

  • Page 19: Operating Panel Mk2

    Updated functions and dialog boxes Operating Panel Mk2 The Mk2 Operating Panel is connected to the Processor Unit using an Ethernet cable. The Operating Panel is provided with a built-in power supply. Details User Setting Buttons On the Mk2 Operating Panel, the four buttons dedicated for user settings or presentation modes are located the top of the panel.
  • Page 20 Simrad SX90 Software Release Note Rotary Switch Functions The Mk2 Operating Panel is fitted with three rotary switches. The switches are identified with numbers. Each switch can be assigned a function related to range, gain, bearing or tilt. Under , assign one function to each rotary switch on the Rotary Switch Options Operating Panel.
  • Page 21 Updated functions and dialog boxes Button Options The Mk2 Operating Panel is fitted with three function buttons. The buttons are identified as . Each button can be assigned a dedicated function. The three function buttons are grouped with the button. Screen Capture Under , assign one function to each...
  • Page 22 Simrad SX90 Software Release Note automatically search within defined sector limits. The sector is identified in the view using two angular symbols. The sector and step settings are made using the function on the menu. Bearing Main Screen Recording This is an "on/off" function. The...

  • Page 23: Operating Panel Mk3

    Updated functions and dialog boxes Operating Panel Mk3 The Mk3 Operating Panel is connected to the Processor Unit with a USB cable. A dedicated power supply unit is not required. Details User Settings Presentation modes On the Mk3 Operating Panel, the requested user setting or presentation mode is chosen with a single button.
  • Page 24 Simrad SX90 Software Release Note Rotary Switch Functions The Mk2 Operating Panel is fitted with three rotary switches. The Mk3 Operating Panel is fitted with two rotary switches. The switches are identified with numbers. Each switch can be assigned a function related to range, gain, bearing or tilt.
  • Page 25 Updated functions and dialog boxes mode is started. The chosen tilt sector is shown on the tilt indicator in the Horizontal view using a shaded background. The sector and step settings are made using the function on the menu. Tilt Main Zoom Place the cursor anywhere in the view, right-click and select...

  • Page 26: Display Options Dialog Box

    Simrad SX90 Software Release Note Select to use the Operating Panel to remove the oldest Delete Oldest Marker marker from the sonar view. Display Options dialog box dialog box is used to specify basic settings for the sonar presentation. Display Options The pages in the dialog box are described in a separate structure.
  • Page 27 Updated functions and dialog boxes Description page offers a range General of "on/off switches". You use them to enable or disable the relevant functions. Note The information shown on the top bar must not be used for vessel navigation. Details Use icons on the main menu Select this function to use icons instead of text on the...
  • Page 28 Simrad SX90 Software Release Note Bottom Depth Select this check box to see the current water depth on the top bar. The information must be provided by an external depth sensor (echo sounder) connected to the SX90 system. Roll Select this check box to see the vessel's current roll movements on the top bar.
  • Page 29 Updated functions and dialog boxes Related functionality Top bar The top bar is located at the top of the display presentation and stretches from the far left to the far right.The top bar gives you fast access to key functionality and navigational information.It provides buttons for hiding and showing the menu, making screen captures, opening the dialog box, and opening...

  • Page 30: Minimum Display Requirements

    Simrad SX90 Software Release Note Minimum display requirements Unless specifically ordered, the SX90 system is not provided with a display. The display must then be purchased locally. You can use more than one display on your Processor Unit depending on personal and/or operational preferences.
  • Page 31 Index Index Bottom Bar Length General page..........28 Units page..........16 Coordinated Universal Time (UTC) Menu on the Right Side description ..........28 General page..........27 minimum requirements display ............. 30 Depth Units page..........16 description New Manually Initiated Track Coordinated Universal Time (UTC)....
  • Page 32 Simrad SX90 Software Release Note Temperature Units page..........16 Top Bar General page..........27 Units page description ..........15 Updated functions and dialog boxes ..... 14 Use icons on the main menu General page..........27 User Settings User Settings Setup page ....... 14 User Settings Setup page description ..........
  • Page 34 ©2022 Kongsberg Maritime...

Table of Contents