Kongsberg Simrad SX90 Reference Manual page 241

NetCDF
The SX90 system supports netCDF4, where the number refers to the version of the
format. SONAR-NetCDF4 is a data and metadata convention for storage of data from
active sonars in NetCDF4 formatted files, defined by The International Council for
the Exploration of the Sea (ICES). Sonar-NetCDF4 consists primarily of a naming
convention and a data structure within the NetDCF4 data model.
Extended range
By adding a specific software license you can increase the maximum range to
10.000 metres.
Procedure
1 On the menu, select
Setup
Observe that the
pages selected from the menu on the left side.
2 On the left side of the
Observe that the
3 Obtain the necessary information about your SX90 system:
• Hardware ID
4 Send the information to one of our dealers or distributors.
You can also use the request form on our website, or contact our support department
directly. You can use the following e-mail address:
• purchase.order@simrad.com
Once the software license string(s) have been returned to you (most likely by e-mail), you
can install the licenses into the software.
5 Open the
Software License
6 Select
Type License String
If you do not have a computer keyboard connected to your SX90 system, select the
button to open an on-screen keyboard. If you have received the license string
Keyboard
on an electronic format (e-mail or text file), you can copy the string from the source
document and paste it into the
7 Select to save the license string and close the
OK
8 Verify that the license string is placed in the
307670/H
Installation
dialog box opens. This dialog box contains a number of
Installation
dialog box, select
Installation
page opens.
Software License
page.
, and type the license string into the dialog box.
Type License String
.
Software License
dialog box.
Type License String
Currently active licenses
Maintenance procedures
.
dialog box.
list.
239