Kongsberg Simrad SX90 Reference Manual page 46

Simrad SX90 Reference Manual
Gear
Press
Gear
as a tool to help you plan and shoot the purse seine. The symbol is intended to be
used in a structured sequence that starts when you plan to shoot the purse seine.
(J) /
Position Track Target Track
Press these buttons to start position or target tracking.
Position Track
A position track permits the SX90 system to automatically control the tilt and
bearing based on the movements of your vessel. It locks on a position defined by
its latitude, longitude and depth. The bearing and tilt settings are automatically
adjusted to compensate for the movements of your vessel.
Target Track
A target track permits the SX90 system to automatically control the tilt and
bearing based on the movements of the chosen target. It locks on the target
defined by its position, heading and speed. The bearing and tilt settings are
automatically adjusted to follow the movements of the tracked target.
A new manually initiated tracked object is automatically given priority status.
Relevant information about the priority target can be found in the lower left corner of
the view. If you change the tilt or bearing settings manually the priority status is lost.
(K)
Trackball
Use the trackball to control the cursor in the user interface.
Before you can change the settings related to a view, you must click inside the view to
activate it. The changes you make are by default only valid for the active view. Several of
the functions offer
Apply to All
the views in the current presentation mode.
Related topics
Getting started, page 33
Operating panels, page 34
44
to place a gear symbol in the active view. The gear symbol is provided
. If you select your setting is applied to all
Apply to All
307670/H