Kongsberg Simrad SX90 Reference Manual page 37

Fish-finding sonar

Hide thumbs Also See for Simrad SX90:

Table of Contents

Press this button to turn the SX90 system on and off.

Before you turn on the SX90 system, make sure that you have sufficient water

depth to lower the transducer!

You must never turn on the SX90 system when the ship is in dry dock. The

transducer may be damaged if it transmits in open air.

You must never turn off the SX90 system by means of the on/off switch on the

Processor Unit. You must ALWAYS use the Operating Panel or select

on the top bar.

While the transducer is moving the indicator lamp flashes, and an audible signal

is sounded. When the requested position has been reached, the indicator lamp is

lit, and the audible signal stops.

to hoist the transducer to its upper position.

to place the transducer in a predefined middle position.

to lower the transducer to its bottom position.

Getting started