Table of Contents
Advertisement
4.5 EZ Camera Setup
Add Camera. Click "Refresh" to refresh the list of online IP cameras which are in the same local network with DVR and
then click
to add the searched camera. Click "Add All" to add all the cameras in the list. Click
to delete the added
camera. Click "Delete All" to delete all the added cameras. See Figure 4-2.
Figure 4-2
Click
to edit an IP camera as shown on the below left. Input the new IP address, subnet mask, gateway, username
and the password of the camera. You can check "Sync to IPC" to modify the IP address of the IP camera via different
network segments for being in the same network segment with the DVR. Click "OK" to save the settings.
8
Advertisement
Table of Contents
