Using The Remote Control - Sharp AU-X18UXD Operation Manual

USING THE REMOTE CONTROL

DISPLAY
1
3
4
5
6
7
8
9
10
1 SUPER JET Symbol
2 MODE Symbols
FAN / AUTO / COOL / DRY
3 BABY MODE Symbol
4 PLASMACLUSTER Symbol
(For Premium models only)
5 SELF CLEAN Symbol
(For Premium models only)
6 ECO Symbols
7 VERTICAL AIR FLOW Symbol
8 BATTERY Symbol
9 BEST SLEEP Symbol
10 TIMER ON / TIMER OFF Indicator
11 TEMPERATURE Indicator
12 TRANSMITTING Symbol
13 FAN SPEED Symbols
: AUTO
: Manual setting
TINSEB026JBRZ.indb EN-4 TINSEB026JBRZ.indb EN-4
LOADING BATTERIES
1
2
2
11
3
4
12
13
NOTE:
• The battery life is approximately 1 year in
normal use.
• Replace the batteries when the remote control
displays "
• When replacing the batteries, always change
both and use the same type.
• If you will not be using the unit for a long time,
remove the batteries from the remote control.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the
receiver window and press the desired
button. The unit generates a beep when
it receives the signal.
• Make sure nothing, such as curtains, block the
signal receiver window.
• The signal effective distance is 7 m.
CAUTION:
• Do not expose the receiver window to direct
sunlight. This may adversely affect its operation.
• Use of certain fl uorescent lamp in the same
room may interfere with transmission of the
signal.
• Do not leave the remote control in direct
sunlight or near a heater. Protect the remote
control from moisture and shock.
EN-4
Remove the battery cover.
Insert two batteries. (AAA(R03))
Make sure the (+) and (-) polarities are
correctly aligned.
Reinstall the battery cover.
Press the RESET button using a
thin stick.
".
7 m
Battery cover
RESET button
Receiver
window
4/28/2560 BE 2:49 PM 4/28/2560 BE 2:49 PM