Lighting Bar - Sharp AU-X18UXD Operation Manual

LIGHTING BAR

(For XP10/13UXD, XP10/15UF models only)
The lighting bar on the unit turns to
different colors to show the operation
situation.
OPERATION
COOL MODE
• Color: Blue or Green
• When the room temperature
DRY MODE
is colse to the setting
temperature, it turns to green,
AUTO MODE
otherwise it's blue.
FAN MODE
• Color: Cool White
• Color: Blue
SUPER JET
• When Super Jet function
is started, 5 lights blink 3
times.
PLASMACLUSTER • Color: Cool White
• Only in FAN only mode.
BABY MODE
• Color: Pink
ECO MODE
• Color: Green
• Color: Orange
• All of the 5 lights will turn on
in the fi rst 10 seconds.
After 10 seconds, just the 1
BEST SLEEP
lights in the middle will keep
lighting.
After 20 minutes all the
lights will turn off.
SELF CLEAN
• Color: Cool White
• Color: White
LED
• Only after press the LED but-
ton when unit is not operating.
TINSEB026JBRZ.indb EN-13 TINSEB026JBRZ.indb EN-13
COLOR
EN-13
The lighting bar also can show the
horizontal airfl ow direction in each
mode.
• Swing:
• Center:
• Right:
• Left:
NOTE:
• When the horizontal airfl ow direction is swing-
ing, all of the 5 lights will turn on.
After the position is decided, the lighting bar
will wave to show the direction.
If you think the lighting bar is too bright.
1
Press the LED button and the light-
ing bar will just keep the middle
light in low bright.
2
Press the LED button again and all
the lights will turn off.
1
2
SENSOR
TO CANCEL
Press the LED button again.
If you need some light when the unit is
not operating.
1
Press the LED button and the light-
ing bar will turn on.
SENSOR
TO CANCEL
Press the LED button again.
1
2
1
4/28/2560 BE 2:49 PM 4/28/2560 BE 2:49 PM