Subscribe to Our Youtube Channel
Related Manuals for Safe Fleet PRIME DESIGN PBB 6001
Summary of Contents for Safe Fleet PRIME DESIGN PBB 6001
- Page 1 PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118 Toll Free: 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email: info@primedesign.net ▪ Website: www.primedesign.net...
- Page 2 CONTENTS OVERVIEW INSTALLER NOTE: Mounting Hardware or Brackets to attach this rack to a vehicle roof or cap are not included in this kit, and must be purchased separately. To purchase Mounting Hardware or Brackets, please contact Prime Design Sales & Support. 1—FBM-0002 ............
- Page 3 FBM-0002 FLUSH Set to distances then torque nuts to 80 in-lbs CHANNELS TO PRE–INSTALLED MOUNTING BRACKETS F r o R i g R e a R e a Flush to end See Note Loosen nuts Crossbar Rear Note: Use Alternate instructions if marked distances exceed 18” (457mm). Set to distances then torque Rear Bracket nuts to 90 in-lbs F r o R i g...
- Page 4 FBM-0002 ALTERNATE Set to distances then torque nuts to 80 in-lbs CHANNELS TO PRE–INSTALLED MOUNTING BRACKETS F r o R i g R e a R e a 12—5/16” (313mm) from end See Note Loosen nuts Crossbar Rear Note: Move Channels rearward if marked front distance exceeds 18” (457mm). Set to distances then torque Rear Bracket nuts to 90 in-lbs F r o R i g...
- Page 5 BASE ASSEMBLY CROSSBARS CROSSBAR ADJUSTMENT F r o Even Front Even Even Rear Even Torque to 90 in-lbs Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability (the “Prime Design Limited Warranty”).
- Page 6 LADDER STOPS Loosen nuts Torque to 90 in-lbs Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability (the “Prime Design Limited Warranty”).
- Page 7 Page Intentionally Left Blank...
- Page 8 USAM-PBB6001-US01 Rev-A 0318...
Need help?
Do you have a question about the PRIME DESIGN PBB 6001 and is the answer not in the manual?
Questions and answers