Chapter 5; Maintenance And Overhauling; Warranty Scope And Period; Warranty Condition - ASL INTERCOM T330 Manual

Equipment Maintenance and Overhauling

5.1 Maintenance and Overhauling

[1]: Ensure the operator checks the grinding plate before using, if any loose bolts are located on the grinding plate or the bolt,
timely fasten the bolt and the nut for preventing uneven abrasion.
[2]: Using this equipment to grind, the operator shall ensure the surface is flat end even.
[3]: When using this machine, you must not block the vent hole. Ensure to clean the vent hole to ensure the normal ventilation
of the motor.
[4]: After 20 days in using, please clean the dust in the inverter and the vent hole, this operation can be done after trouble
shooting.
[5]: When dry grinding with this equipment, it must be equipped with a vacuum cleaner.
[6]: Please replace the gear oil (150#) regularly. The new machine needs to replace the gear oil after grinding for about 1000m
and once every 5 months after the run-in period.
[7]: Clean the external housing of this equipment after every use in the premise of outage, and put it
in dry and cool place for next use, thus extending the service life.
[8]: Please operate this equipment strictly following the instructions, so as to avoid unnecessary loss.
The quality of this product is warranted to be free from defects in both materials and workmanship. The machine warranty is as
follows.
Part
Engine
Fuel System
LP Tank (On select models)
Machine Body Parts
Battery
Note: this warranty does not cover certain wearable parts such as belts and engine tune up parts. LP Engines are warranted by
the engine manufacturer for the term specified by the engine manufacturer. ASL Machines USA promises, at their discretion, to
repair or replace any product or part(s) which examination proves to be defective in either workmanship or materials used. ASL
Machines USA must be notified directly within the warranty period. This warranty does not cover damage, or failure caused by
abuse, misuse, neglect, disassembly, alteration, unauthorized modification, lack of proper maintenance, theft, or any damage
by freight carriers. This warranty applies to parts and labor only, and does not cover any incidental or consequential damages.
6 .1 If the machine stops working suddenly during the operation, please follow the below instruction.
[1]: Check to ensure the main power switch on the control panel is in the on position and is not damaged in any way.
[2]: Check the internal wiring of the power socket of the machine to ensure it is not loose and the wire has a good connection.
[3]: Check the motor wire connection box to ensure it is not moist and whether there are burned wires.
[4]: To ensure there is sufficient current to operate this machine, we suggest customers to use 3*6square cable
to operate 220V 11KW motor and 4*4square meter cable to operate 380V 11KW motor.
Chapter V
Machine Warranty Information
2 Year Warranty
2 Year Warranty
1 Year Warranty
2 Year Warranty
1 Year Warranty
This warranty is non-transferable.
ASL Machines USA
Chapter VI Fault Diagnosis
,
2
10