Extra Sensor Area - La Crosse Technology S77925 Setup Manual

Extra Sensor Area

This station can display data for an add-on Rain Gauge as well as up to three
additional Temp & Humidity Sensors. These readings will all appear in the
upper left section of the LCD.
Pressure (default)
Add Extra Sensors:
1. Install batteries into your extra sensor(s).
Note: For Temp/Humidity sensors, be sure to select different channels (1,2,3)
before you insert batteries.
2. Hold the EXTRA
to animate. This will start a search for your sensors.
3. Your sensor(s) should connect within the next few minutes. Press the
button to cycle through Extra Sensor and Pressure data. The Auto Scroll Icon
will appear when activated.
Delete Extra Sensors:
It's possible the station will pick up a neighboring sensor. To remove it, press
the EXTRA button to view that sensor. And while viewing it, hold the
button to delete it.
Purchase Extra Sensors:
Visit lacrossetechnology.com/products/S77925#parts
compatible add-on sensors.
Rain
button on the station until the Reception Indicator
Temperature/Humidity
to find and purchase
starts
EXTRA
- (MINUS)
10