Sound; Bell / Vibrate; Ring Type; Dtmf Length - UTStarcom UTS-C3000 User Manual

c3000_2 2004.9.14 7:5 PM 페이지18

SOUND

SOUND

BELL / VIBRATE

This feature is used to select the receive type
between bell, or vibrate.
1
1
Press [ ].
2
2
Press [ ], then [
Select the parameter by using the navigation key.
• Bell : Bell ringing and Lamp is blinking.
•Vibrate : Vibrating and Lamp is blinking.
• Vib / Bell : Vibrating first 2 time and then ringing.
• Lamp only : Lamp is blinking.
NOTE
• Conditions in Vibrate mode.
Incoming call received : Activate vibrate
New Text Message received : Activate vibrate
New Voice Mail Notification : Activate vibrate
Service Mode Alert : Use beep
Schedule, Alarm : Activate vibrate
Other. : Beep
3 3
Press [ ] to save it.
18
].
SOUND
SOUND

RING TYPE

This feature is used to select the ring type the user wants.
1
1 Press [ ].
2 Press [ ], then [ ].
2
Select the parameter by using the navigation key.
To listen the ringer tone :
Scroll and down in selection list.
• Classic Bell : Lake, Waltz, Spring, Skate Waltz, Carmen, Turkischer,
Chorus, La Paloma, Pathetic Sym, Joy to World, Noel,
Hungari Dance, Jingle Bell, Serenade, Pastoral,
• My Bell : Select File
• Create Bell : Analog, Effect01, Funny Park, Western, Chinese Song,
Fanatstic, Orgol, Duck, Country, Tap Dance, Seashore,
Comic
3
3 Press [ ] to save it.

DTMF LENGTH

This feature select sending DTMF tone length when user press digit key
in calling state.
1
1 Press [ ].
2 Press [ ], then [ ].
2
Select the parameter by using the navigation key.
• Normal : Send DTMF until release the digit key. (Max 2 sec.)
• Long : Send DTMF in 150msec.
3 Press [ ] to save it.
3
19