Table of Contents
Advertisement
Servicing
FIG. 7: Fluid Leak Detection
•
Correct hydraulic leaks immediately. All fittings must
be tight and all lines and hoses in good condition.
Escaping hydraulic fluid, under extremely high
pressure, can penetrate the skin and cause blood
poisoning. Use a piece of wood or cardboard to
detect fluid leaks (Fig. 1). If injured by escaping fluid,
see a doctor immediately.
•
After repairing or adjusting planter, remove all tools
and parts from machine before operating it.
•
When working around discs, be careful to not get cut
on sharp edges.
•
Lower planter to the ground before attempting to
remove a wheel for tire repair.
•
Tire changing can be very hazardous and must be
done by trained personnel using proper tools and
equipment.
•
Do not re-inflate the tire that was seriously
under-inflated or run flat. Have it checked by qualified
personnel.
LOCKUP DEVICES
Flat-Fold Markers
FIG. 8: The lockout valve in the closed position (1).
With markers fully raised, turn lockout valve to off position,
stopping fluid flow to the marker cylinder.
m
WARNING: Always lock up markers in
raised position when working around,
storing or transporting planter.
FIG. 9: The lockout valve in the open position (1).
To allow marker operation, turn lockout valve to the open
position.
4283411M1
FIG. 7
1
FIG. 8
1
FIG. 9
Safety
D-5842a
FC080002
FC080001
01-9
Advertisement
Table of Contents
