Cleaning The Filters - Shark Rotator NV600 Series Instructions Manual

STEP 3
3 Press top dust-cup
release latch to access
dust screen and remove
built-up debris as required.
FOAM FILTER
FILTER FRAME
FELT FILTER

CLEANING THE FILTERS

1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
HEPA
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill, pull
the latch forward, and
pull the grill away from
the vacuum. Remove and
rinse the HEPA filter.
s h a r kc l e a n . c o m
20