Driver Assistance Settings; Display Settings; Traffic Settings; Units And Time Settings - Garmin ZUMO XT Owner's Manual

Driver Assistance Settings

Select Settings > Driver Assistance.
Rider Alerts: allows you to enable or disable alerts for upcoming zones or road conditions
Features and Alerts, page
Speeding Alert: alerts you when you are exceeding the speed limit.
Route Preview: shows a preview of the major roads in your route when you start navigation.
Break Planning: reminds you to take a break and shows upcoming services after you drive for an extended
time. You can enable or disable break reminders and upcoming service suggestions.
Automatic Incident Detection: enables the device to detect a possible vehicle incident.
Incident Notification: allows you to set up a contact to be notified when the device detects a possible vehicle
incident.
Proximity Alerts: alerts you when you approach speed cameras or red light cameras.

Display settings

Select Settings > Display.
Orientation: allows you to set the display to portrait (vertical) or landscape (horizontal).
NOTE: this feature is not available on all product models.
Colour Mode: allows you to select day or night colour mode. If you select the Auto option, the device
automatically switches to day or night colours based on the time of day.
Brightness: allows you to adjust the display brightness.
Display Timeout: allows you to set the amount of idle time before your device enters sleep mode while using
battery power.
Screenshot: allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder
of the device storage.

Traffic Settings

From the main menu, select Settings > Traffic.
Traffic: enables traffic.
Current Provider: sets the traffic provider to use for traffic data. The Auto option selects the best available
traffic data automatically.
Subscriptions: lists the current traffic subscriptions.
Optimise Route: enables the device to use optimised alternative routes automatically or upon request
traffic delays on your route, page
Traffic Alerts: sets the traffic delay severity for which the device displays a traffic alert.

Units and time settings

To open the Units and Time settings page, from the main menu, select Settings > Units & Time.
Current Time: sets the device time.
Time Format: allows you to select a 12-hour, 24-hour or UTC display time.
Units: sets the unit of measure used for distances.
Position Format: sets the co-ordinate format and datum used for geographical co-ordinates.

Setting the Time

1 From the main menu, select the time.
2 Select an option:
• To set the time automatically using GPS information, select Automatic.
• To set the time manually, drag the numbers up or down.
50
9).
18).
(Rider Awareness
(Avoiding
zūmo settings