Mounting Your Device In An Automobile - Garmin ZUMO XT Owner's Manual

Mounting Your Device in an Automobile

NOTICE
Before mounting the device, check the local laws pertaining to windscreen mounting.
WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important safety and product information guide in the product box for product warnings and other
important information.
NOTE: the automobile mount is not included with all device models. Go to garmin.com to purchase optional
accessories.
1 Plug the automotive power cable into the port on the device.
2 Remove the clear plastic from the suction cup .
3 Clean and dry your windscreen and the suction cup with a lint-free cloth.
4 Press the suction cup to the windscreen, and flip the lever back toward the windscreen.
5 Snap the cradle onto the suction-cup arm.
6 Fit the bottom of your device into the cradle.
7 Press the device into the cradle until it snaps into place.
8 Plug the other end of the automotive power cable into a power outlet.
8 Installation