First Use Of The Machine; Use - Wilfa WSP-2A Instruction Manual

FIRST USE OF THE MACHINE

EN
Read this instruction carefully and keep them for future references.
Please start the coffee maker with fresh water and without coffee before it is used
for the first time.
Wilfa SVART Precision is equipped with a unique pump that always ensures you
fresh water every time you brew coffee.

USE

• Set Wilfa SVART Precision on a flat surface.
• Fill the removable water tank with fresh cold water; use the water scale on the
side.
• Place the coffee filter (1x4) in the filter holder. Use desired quantity of coffee in
the filter.
• We recommend that you use ground coffee, about 60 g per liter of water. Try
out the first times until you find out how much coffee you think is best. We
also recommend that you use our Wilfa Gram Stål scale that gives 1g intervals
for best results.
• We recommend the following ratios of water and coffee:
1,25 l - 75g
1 l - 60g
0,75 l - 45g
0,5 l - 30g
0,25 l - 15g
• Set the flow control in relation to water/coffee.
• Turn the power switch on. "Start" button will blink twice.
• Press the start button to start to brewing process.
• Wilfa SVART Precision has a unique pump that pulls water through the system
from the first to the last drop.
• When the brewing process is complete, the unit will go to a "keep warm"
position for up to 40 minutes.
• By setting the flow control to the right, it will act as a drip stop.
• The coffee should be served fresh.
• Turn of the power switch, when you are finished using the maker.
INSTRUCTION MANUAL · WILFA SVART PRECISION
Please note that different grinds and coffee types will
influence these ratios somewhat.
8