Table of Contents
Advertisement
1. General
1.2.9 Maintenance
1.2.9.1 General maintenance information
Before you do maintenance, lubricate, do
servicing, clean, or make adjustments:
• Park the machine on a solid, level surface.
• Disengage the tractor power take-off.
• Make sure that all the controls are in the
neutral position and apply the parking brake.
• Make sure that the machine and the
attachments are lowered to the ground.
• Stop the engine and take the key with you.
• Look and Listen! Make sure that all parts that
move are stopped.
• Put chocks in front of and behind the wheels of
the machine before you do work on or below
the machine.
Stay near the machine when the tractor is in operation.
Know the dimensions and the weights of parts when you do the servicing. Do not stand below or near a
part while it is moved with a hoist or other lift equipment.
After you do work on the machine, remove all tools from the machine.
Make sure that electrical connectors are clean before you connect them.
Do a check for loose, broken, missing, or damaged parts. Make sure that the machine is in good repair.
Make sure that all guards and shields are in position.
Always lift the machine, stop the tractor engine, apply the parking brake, move to the park position (or
neutral) remove the key and install the cylinder stops channels before you do work around the machine.
Do not go below the machine. If you must go below the machine, make sure that the machine is blocked
and the cylinder lockup channels are in position.
Discs have sharp edges, be careful when you do work around the discs.
Do not do the servicing, examine or adjust chains
or belts while the engine is in operation.
1-12
Fig. 14
Fig. 15
[V]
GUID-93C8628D-B392-4191-80DB-7D54BDAAF61B [V18]
GUID-DB4C2E27-9DAC-4734-83E4-BC4BB5C26EAF-high.jpg [High]
GUID-7D1C9640-D737-4F38-8886-F1D2280DF613-high.jpg [High]
9700VER Planter
4283626M1
Advertisement
Table of Contents
